How to Apply
Your Decal
Vinyl Application Instructions
Want the best results from your new decal? This page will walk you through how to apply your vinyl sticker step-by-step. Whether you're decorating a car window, tumbler, laptop, or anything in between, following these tips will help ensure a smooth, long-lasting stick.
You'll also find helpful do's and don’ts, surface prep advice, and answers to common questions. Let’s make your decal look its best — and stay that way!
Vinyl Application Instructions
-
1. Clean the Surface
- Wipe the application area with rubbing alcohol wipe or spray to remove any dirt, oil, or debris.
- Let the surface dry completely before moving to the next step.
-
2. Peel the Backing
Slowly peel the paper backing off the decal, making sure the vinyl design sticks to thetransfer tape(the clear/red-lined layer on top).
🛑 If any parts of the vinyl stay on the backing, press them back down and rub gently before peeling again.
-
3. Position the Decal
Carefully align your decal on the desired surface. Once you're happy with the placement, press it down *starting from the center outward* to avoid air bubbles.
-
4. Apply Pressure
Use a credit card or hard-edged tool to firmly press the decal onto the surface. Rub over the entire design several times to ensure a strong bond.
-
5. Remove the Transfer Tape
Slowly peel off the transfer tape, leaving the vinyl design stuck to your surface.
If any pieces lift with the tape, press them back down and rub again before peeling. -
6. Let It Set
Allow the decal to set for at least 24 hours before washing or exposing to heavy use.
-
⚠️ Important Notes
- For best results, apply your decal in temperatures between 50°F and 90°F (10°C – 32°C).
- Avoid applying in direct sunlight or extreme cold.
- Do not use strong cleaners, abrasive scrubs, or high-pressure car washes, as these may reduce the decal's lifespan.
- Suitable for smooth, non-porous surfaces such as glass, plastic, and metal.